Keep up to date with our latest company news and relevant industry knowledge.
Time: 2026-08-01 06:18:22 Source: Henan Province Jianyun Cable Co., Ltd.
Author: Jianyun Cable
Medium voltage power cable is a critical part of modern electrical distribution systems. It transfers electrical energy between substations, transformers, industrial facilities, renewable energy plants, and large commercial loads.
Compared with low-voltage cable, medium voltage power cable requires a more advanced insulation and shielding structure to manage higher electrical stress. XLPE insulation is widely selected because it provides strong dielectric performance, good heat resistance, and dependable long-term operation.
Jianyun Cable supplies 11kV XLPE power cable with copper conductors, optional steel wire or steel tape armor, and single-core or three-core configurations. Cable structures and conductor sizes can be selected according to voltage level, current capacity, installation method, and project requirements.
Recommended Medium Voltage Power Cable:
MV 11kV XLPE Power Cable from Jianyun CableMedium voltage power cable is designed for electrical distribution systems operating above conventional low-voltage networks. Depending on regional standards and project definitions, medium-voltage systems commonly cover voltage classes from approximately 1kV to 35kV.
An 11kV cable is frequently used in industrial distribution, utility networks, substations, renewable energy facilities, and underground power systems. It can connect transformers, switchgear, motors, and major electrical loads across a facility or distribution network.
| Component | Main Function |
|---|---|
| Copper conductor | Carries electrical current efficiently |
| Conductor screen | Creates a smooth electrical interface around the conductor |
| XLPE insulation | Provides the main dielectric protection |
| Insulation screen | Helps control the electrical field |
| Metallic screen | Provides grounding and fault-current capability |
| SWA or STA armor | Provides additional mechanical protection |
| PVC outer sheath | Protects the cable against moisture, abrasion, and environmental exposure |
| Advantage | Project Benefit |
|---|---|
| Strong electrical insulation | Supports reliable operation at medium-voltage levels |
| High operating temperature | Provides dependable performance under continuous load |
| Low dielectric loss | Supports efficient power distribution |
| Optional armored structure | Improves protection in underground and industrial installations |
| Multiple conductor sizes | Allows selection according to current and voltage-drop requirements |
| Single-core and three-core options | Supports different system and installation designs |
| Feature | Single-Core Cable | Three-Core Cable |
|---|---|---|
| Construction | One insulated conductor per cable | Three insulated conductors in one outer sheath |
| Installation | Installed as three separate phase cables | Installed as one complete cable assembly |
| Handling | Easier to handle at larger conductor sizes | Compact for many distribution projects |
| Typical use | High-current and longer-distance installations | Industrial and underground distribution systems |
| Armor Type | Construction | Typical Application |
|---|---|---|
| SWA | Steel wire armor | Installations requiring strong tensile and mechanical protection |
| STA | Steel tape armor | Underground installations exposed mainly to compression and impact |
| Specification | Available Option |
|---|---|
| Product type | XLPE medium voltage power cable |
| Typical voltage classes | 5kV, 11kV, 15kV, 20kV, 25kV, and 33kV |
| Conductor | Copper |
| Insulation | XLPE |
| Armor | SWA or STA |
| Outer sheath | PVC |
| Core configuration | Single core or three core |
| Cross-sectional range | 10mm² to 240mm² |
| Reference standard | IEC 60502 or project specification |
| Selection Factor | Recommendation |
|---|---|
| Rated voltage | Match the cable voltage class to the system voltage |
| Load current | Select conductor size according to current-carrying capacity |
| Voltage drop | Check conductor size against route length and allowable losses |
| Core configuration | Choose single-core or three-core cable according to system design |
| Installation method | Consider direct burial, cable tray, duct, tunnel, or indoor installation |
| Mechanical risk | Select armored cable where additional protection is required |
| Environmental conditions | Evaluate moisture, temperature, chemicals, and soil conditions |
| Applicable standard | Confirm IEC, BS, DIN, ICEA, or project-specific requirements |
Jianyun Cable supplies copper conductor XLPE medium voltage power cable for electrical distribution, construction, utility, industrial, and infrastructure projects.
The product can be supplied in single-core or three-core configurations with PVC outer sheathing and optional SWA or STA mechanical protection. Different voltage levels, conductor sizes, cable colors, drum lengths, and packaging options can be manufactured according to project requirements.
View Product Details and Request a Quote:
MV 11kV XLPE Medium Voltage Power CableMedium voltage power cable provides the electrical connection between substations, transformers, industrial systems, and major power loads. Selecting the correct voltage rating, conductor size, insulation system, armor, and core configuration helps improve distribution reliability and long-term operating performance.
Jianyun Cable supplies MV 11kV XLPE power cable for underground networks, industrial facilities, utility distribution, construction, and renewable energy projects.
Request Your Medium Voltage Power Cable Quotation:
Contact Jianyun Cable for MV 11kV XLPE Power CableMedium voltage power cable is used to distribute electrical energy between substations, transformers, industrial facilities, renewable energy plants, switchgear, and major electrical loads.
An 11kV XLPE cable is a medium-voltage power cable using cross-linked polyethylene as the main insulation material for an 11kV electrical distribution system.
XLPE provides strong dielectric performance, high operating-temperature capability, low dielectric loss, and dependable long-term insulation.
Armored cable should be considered for direct burial, underground routes, industrial facilities, and locations where the cable may be exposed to mechanical impact, pressure, or tension.
SWA uses steel wires and provides strong tensile and mechanical protection. STA uses steel tapes and is commonly selected where resistance to compression and impact is more important.
Cable size should be selected according to voltage, load current, route length, allowable voltage drop, short-circuit level, installation method, ambient temperature, and applicable electrical standards.
CE Certification 450/750v H07VVF Flexible Copper PVC Insulated Ac Cable 3*2.5 Mm
low voltage copper conductor PVC insulation underground BV BVR cable for industr
PVC electric wires are one of the most widely used electrical conductors in resi
H07V-U wire is a flexible, low voltage electrical wire commonly used in industri
