Low voltage power cables are used to transmit electrical power at voltages typically up to 1,000 volts (1 kV). These cables are widely used in residential, commercial, and industrial settings for a variety of applications, including power distribution, lighting, and control systems.
Home / Product / Low Voltage Power Cable / 120mm² 4 Core LSZH Fire Rated Cable (0.6/1KV)
120mm2 X 4c Cu/MICA/XLPE/LSZH FIRE RATED CABLE 0.6/1 KV
|
Attribute |
Value |
|
Type |
Low Voltage |
|
Conductor Material |
Copper |
|
Insulation Material / Insulation |
XLPE / XLPE Insulation |
|
Jacket |
PVC |
|
Sheathed |
LSZH |
|
Application |
Construction |
|
Certificate |
CE, TUV, BV, PSB |
|
Brand Name |
JYXL |
|
Place of Origin |
Henan, China |
|
Color |
Red, Blue, Yellow, green |
Packaging and Delivery
|
Attribute |
Value |
|
Port of dispatch |
Tianjin port, Qingdao port, Shanghai port |
|
Selling Units |
Single item |
This product is manufactured according to GB/T12706.1, equivalent to IEC60502.1. Or BS, DIN, ICEA standard as customer request.
The product is suitable for power transmission and distribution lines with rated power frequency voltage up to and including 0.6/1KV.
1). Rated power frequency voltage Uo/U: 0.6/1KV.
2). Max. Permissible continuous operating temperature of conductor: 90℃
3). Max. Short-circuit temperature of the conductor shall not exceed: (5S maximum duration) 250℃
4). The ambient temperature under installation should not below 0℃
5). The bending radius of a cable should not be less than 15 times of the cable diameter.
6). The test voltage (A.C.): 3.5kV/5min.
7). The flame-retardant properties of cable comply with grade A, B, C of GB/T19666-2005 or IEC60332.
Conductor: Solid or stranded copper,aluminum
Insulation: Cross-linked polyethylene( XLPE or PVC)
Circuit Identification: The insulation shall be red, black
Filler: Polypropylene lament with lapped binding tape
Inner Sheath: Polyvinyl chloride (Black)
Armor: Galvanized steel wire
Core-covering: Binding tape
Outer Sheath: Polyvinyl chloride (Black)
Package: Wooden Drum Package or Iron-wooden drum
|
Type |
Designation |
Applications |
|
YJV |
Copper conductor,XLPE insulated,PVC sheathed power cable |
For laying indoors,in tunnel or cable trench, unable to bear external mechanical forces. Single core cable is not allowed to laid in magnetic duct. |
|
YJLV |
Aluminum conductor,XLPE insulated,PVC sheathed power cable |
|
|
YJY |
Copper conductor, XLPE insulated,PE sheathed power cable |
|
|
YJLY |
Aluminum conductor, XLPE insulated,PE sheathed power cable |
|
|
YJV22 |
Copper conductor,XLPE insulated,steel tape armoured, PVC sheathed power cable |
For laying indoors,in tunnel in cable trench, or direct in ground,able to bear external mechanical forces. Single core cable is not allowed to laid in magnetic duct. |
|
YJLV22 |
Aluminum conductor,XLPE insulated,steel tape armoured, PVC sheathed power cable |
|
|
YJV23 |
Copper conductor,XLPE insulated,steel tape armoured, PE sheathed power cable |
|
|
YJLV23 |
Aluminum conductor,XLPE insulated,steel tape armoured, PE sheathed power cable |
|
|
YJV32 |
Copper conductor,XLPE insulated,steel wire armoured, PVC sheathed power cable |
For laying indoors,in tunnel cable trench, well or direct in ground, able to bear external mechanical forces and certain pulling force. |
|
YJLV32 |
Aluminum conductor,XLPE insulated,steel wire armoured, PVC sheathed power cable |
|
|
YJV33 |
Copper conductor,XLPE insulated,steel wire armoured, PE sheathed power cable |
|
|
YJLV33 |
Aluminum conductor,XLPE insulated,steel wire armoured, PE sheathed power cable |
XLPE insulated power cables for rated voltages of 1 kV (Um = 1,2 kV) is used to
600/1000V XLPE Insulated Cables (IEC 60502-1) are designed for power distributio
The outer PVC (Polyvinyl Chloride) sheath offers additional protection against m
NYY cable, also known as PVC-insulated power cable, is designed for power transm
